Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Kenmore
If your Kenmore garage is still riding on original springs, factory rollers and a door that was hung when the neighborhood filled in, you’re not alone. Much of the housing here dates from the mid-century ranch boom, and plenty of those doors are well past their service life. A grinding opener, a door that binds halfway up, or a track that’s rusting from the bottom are the usual first signs. We install new garage doors across Kenmore, and we’re honest about when a retrofit makes sense and when it doesn’t. Call (855) 981-4153 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Kenmore Homeowners Call Kirkland Garage Door Repair Pros for Garage Door Installation
Garage doors are all we do, and that focus shows when we’re talking through a Kenmore door that’s lived through decades of damp air. We’re not a general contractor who hangs a door on the side; every tool and technician we work with lives inside the garage door trade. That matters here, where the diagnosis is often more interesting than the install.
Our technicians have up to 14 years of experience, and they’re certified to work on eight widely installed brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. When we look at a Kenmore door, we’re reading the hardware, not guessing. We measure spring cycles, check balance, and inspect tracks and rollers for corrosion before we recommend anything.
We serve Kenmore and the streets around it directly, and we know the local housing stock: mid-century ranches with attached garages, plus newer infill construction where the door hardware and the damp exposure are different problems entirely. If you’re ready to plan a replacement, our garage door installation team can walk you through options and give you a written price before any work starts.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Kenmore
From a single-car replacement to a custom door built for your opening, we handle the full range of installation work for Kenmore homes. Here’s what each service covers.
New Door Installation
A new door is the right call when the hardware on your Kenmore garage has aged past the point where repair keeps paying off. We measure the opening, walk you through door styles and materials that suit a ranch or a newer build, and install it as a complete system with tracks, springs, rollers and weather seal. Estimated new door installation for a typical Kenmore home runs $700-$2,200, and the written estimate sets the final price.
Single Car Door
Single-car openings are common on Kenmore’s older, narrower lots, and they’re where legacy one-piece doors often linger. We can replace a tired single door with a new sectional that lifts cleanly and seals against the damp, without changing the character of a mid-century ranch. We measure first, then order and schedule; this is planned work, not an emergency repair.
Double Car Door
A double-car door is heavy, and on Kenmore homes the springs that carry it take a real beating from year-round moisture. When we install a double door, we size the torsion springs to the actual door weight and check that the tracks stay true under load. Estimated installation for a double door typically falls in the higher part of our $700-$2,200 range, depending on door type and hardware.
Custom Garage Door
If your Kenmore garage opening is an odd size, or you want a door that matches the architecture of a ranch or a newer build, we can spec a custom door through brands like Amarr and Wayne Dalton. Custom work is measured, ordered and scheduled, so we take the time to get the dimensions right the first time. You’ll get a written price before anything is ordered.
We also install steel doors and wood doors, and we’ll talk through how each holds up against Kenmore’s persistent drizzle before you commit.
Trusted Brands We Service in Kenmore
We work on your brand. Our technicians are certified across eight major door and opener lines, including Amarr, Wayne Dalton, Craftsman and Raynor. That range means we can service or replace most of what’s already on a Kenmore garage without sending you elsewhere. We don’t claim to stock parts locally; instead, we diagnose accurately, order what’s needed, and schedule the install. Fast turnaround on planned work, and a clear answer on whether your existing hardware is worth keeping.
Common Garage Door Installation Problems We See in Kenmore Homes
Kenmore’s lake-damp hillside air shapes what goes wrong with a garage door more than anything else. Here’s what we run into most.
- Seized rollers within a couple of seasons. The damp air off Lake Washington causes standard steel rollers to pit and bind faster than inland doors, which throws off balance and strains the opener. Stainless steel rollers and a tighter lubrication interval solve most of this.
- Rusted original steel tracks on mid-century ranches. The tracks corrode and pit long before the door panels themselves give out, causing the door to bind and the seal to fail. Replacing the tracks is often the difference between a retrofit and a full new door.
- Springs at the end of their cycle. Original torsion or extension springs on older Kenmore doors snap after enough cycles, and the opener usually gets blamed first. Springs carry the door’s weight, so when one lets go, the opener grinds and strains but won’t lift the door.
- Wood and older sectional doors warping in moisture. Persistent damp swells and bows wood doors, throwing off track alignment and wrecking the weather seal. When the door itself is warped, a new door usually makes more sense than chasing repairs.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Installation in Kenmore, WA
New door installation in Kenmore typically runs $700-$2,200, depending on whether it’s a single or double door, the door material and the hardware package. Custom doors and upgraded materials sit at the higher end. Everything below is a typical estimated range for the Kenmore market, and the written estimate is the price.
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2,200 |
| Spring Repair (one spring) | $180 – $340 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Roller Replacement | $110 – $220 |
| Track Realignment | $120 – $240 |
A matched pair of springs is usually replaced together, so a pair costs about twice the single-spring range. Springs, tracks and cables are dangerous to handle without the right tools and training, so we recommend a trained professional for anything beyond a visual check. Estimates are free, and the price is quoted and agreed before any work starts. Call (855) 981-4153.
We Also Serve Cities Near Kenmore
We serve homeowners in the towns around Kenmore too, including Lake Forest Park, Bothell, Bothell East and Bothell West. The damp conditions and older housing stock don’t stop at the city line, so the same repair-versus-retrofit approach applies across the area. If you’re just outside Kenmore, call and we’ll confirm coverage for your address.
Serving Kenmore, WA – Our Local Coverage Area
We serve Kenmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Kenmore
In most cases, installing new makes more sense than retrofitting an original one-piece door. Those doors ride on old hardware and rarely seal well against Kenmore’s damp, so you end up replacing tracks, rollers and springs to keep a door that’s already tired. A full new door runs $700-$2,200 estimated, and you get modern springs sized to the door. Call (855) 981-4153 for a free measure and a written price.
Because of the lake-damp hillside air. Standard steel rollers on Kenmore doors can seize within a couple of seasons off the water, and the damp accelerates pitting and rust year-round rather than just in winter. That’s why we often recommend stainless steel rollers and lubrication on a tighter interval. Roller replacement runs $110-$220 estimated. Call (855) 981-4153 for an exact quote; estimates are free.
Yes, typically. A new steel door with stainless rollers and a proper weather seal handles Kenmore’s persistent moisture better than aging wood or an original sectional that’s already warping. We still recommend keeping up with lubrication, but new hardware starts from a clean baseline. New door installation runs $700-$2,200 estimated. Call (855) 981-4153 to plan the job.
Spring life depends on how many cycles the door runs, and we can measure the wear during a visit. On older Kenmore doors still on factory springs, they’re often near the end of their cycle and the opener gets blamed first when one lets go. Spring repair runs $180-$340 for one spring, and a matched pair costs about twice that. Call (855) 981-4153 for a free estimate.
Often it isn’t. When the opener grinds and strains but won’t lift the door, the springs are usually the culprit, since they carry the door’s weight. A technician should check balance, spring cycles and corroded rollers before blaming the opener. Open installation runs $250-$550 estimated if the opener itself is the problem. Call (855) 981-4153 to get it looked at. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Closing
If a failing opener or a rusted track is on your list, the earlier a technician looks at it, the cheaper the fix usually is. Call (855) 981-4153 for a free estimate on garage door installation in Kenmore. We’ll measure, explain your repair-versus-replace options, and put a written price in front of you before any work starts.
Written by the team at Kirkland Garage Door Repair Pros.