Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Kenmore?
Garage door work in Kenmore typically costs $150 – $600 for most repairs, and a full new door installation typically runs $700 – $2,200. Spring repair is usually $180 – $340 for a single spring, while opener repair lands around $120 – $320. Every price is set per job by a written estimate, and estimates are free.
That’s the short version. What follows is the line-by-line breakdown we use when a homeowner in Kenmore asks what a repair or replacement will actually run, plus the local factors that push a job toward the top or bottom of each range. Garage doors are all we do, so the numbers below come from door work, not from a general contractor’s guess.
Key Takeaways
- Most garage door repairs in Kenmore fall between $150 and $600.
- A single-spring repair is typically $180 – $340; matched pairs are replaced together and cost about twice that.
- New door installation ranges from $700 to $2,200 depending on size, material and insulation.
- The written estimate sets the final price, and getting that estimate costs nothing.
Garage Door Cost Breakdown (2026)
Here’s how the common jobs break down for the Kenmore market. These are typical estimated ranges, not quotes. A firm price comes after we see the door, the opener and the hardware in person.
| Service | Typical Estimated Range | What It Covers |
|---|---|---|
| Garage door repair (general) | $150 – $600 | Diagnosis and fix of hinges, rollers, cables, tracks or panels |
| Spring repair (one spring) | $180 – $340 | Replacement of a single torsion or extension spring |
| Spring pair replacement | About twice the single-spring range | Matched pair, replaced together as standard practice |
| Cable repair | $130 – $250 | Frayed, snapped or off-drum lift cables |
| Opener repair | $120 – $320 | Motor, gear, logic board, remote or sensor faults |
| Opener installation | $250 – $550 | New opener installed and calibrated |
| Panel replacement | $250 – $500 | One damaged section swapped out |
| Track realignment | $120 – $240 | Bent or shifted track brought back to plumb |
| Roller replacement | $110 – $220 | Worn rollers replaced, door quieted |
| New door installation | $700 – $2,200 | Full door replacement, hardware and calibration included |
A couple of things drive the spread inside each range. A single-car door with a straightforward broken roller sits near the bottom; a double-car insulated door with a bent track, two worn cables and a stripped opener gear climbs toward the top. Material choice moves installation prices the most – a basic steel door with no insulation lands near $700, while a heavier insulated door in a larger opening climbs toward $2,200. Old hardware that’s seized or rusted adds labor time, and so does a door that’s been binding for months before the homeowner calls. If you want a real number for your door rather than a range, Kirkland Garage Door Repair Pros can look at it and put the price in writing.
What Affects Garage Door Pricing in Kenmore
Kenmore sits between Lake Washington and the Sammamish Valley, and the way houses here are built shapes what a garage door job actually involves. A few factors worth knowing before you compare quotes:
- Door size and material. A standard single-car steel door and a wide double-car insulated wood-look door are very different jobs. The bigger and heavier the door, the more hardware it needs and the more the installation runs.
- Number of springs. Most modern doors use a matched pair of torsion springs. Springs wear at the same rate, so replacing one and leaving its partner is a short-term fix. A pair costs about twice the single-spring range, which is why the quote often lists both.
- Opener age and brand. A 1990s chain-drive opener with a failed logic board is priced differently than a newer belt-drive unit with a stripped gear. We work on LiftMaster, Chamberlain, Genie, Craftsman and the other major platforms, so a brand name on your opener doesn’t change whether we can service it.
- Condition of the tracks and panels. A door that’s been hit or has a track knocked out of plumb usually needs realignment plus a panel, which stacks two line items. A door that only needs rollers and a lube stays near the low end.
- Local weather exposure. Kenmore’s wet winters and the damp air off the lake work on steel hardware. Rollers, hinges and cables corrode faster on a door that faces the weather, and a corroded cable is a repair, not a tune-up. Doors on the shaded side of a house dry out slower and show it first.
- Access and ceiling height. A low-clearance garage or a tight ceiling changes how an opener or torsion assembly gets installed and adds time. Homes around Kenmore’s older lakefront streets and the hillside lots off Simonds Road often have garage ceilings that weren’t built for modern door hardware.
How to Save on Garage Door
There’s no secret trick to a lower price – the savings come from catching problems early and not paying for work you don’t need. A few practical moves:
- Fix the small stuff before it becomes a big job. A squealing roller or a slow opener is cheap to address. Left alone, a binding door puts extra strain on springs and cables, and a snapped cable can whip a track out of alignment. The repair bill grows with the damage.
- Listen to the door. A bang, a grind or a door that slams shut is a warning. Addressing it while it’s still a single line item keeps the job near the low end of the range.
- Replace the spring pair together. It costs more up front than one spring, but a new spring paired with a worn one means you’ll be paying for a second service call sooner.
- Get the estimate in writing before any work starts. That’s how you know the line items and the total before a technician touches the door. Our estimates are free.
- Don’t put off a broken door. A door stuck open leaves the garage exposed, and a door stuck down traps the car. Both turn a repair into an emergency, and emergency calls are more disruptive to your day.
If your door is already making noise or running slow, call (855) 981-4153 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
How Does Spring Repair Pricing Work in Kenmore?
Spring repair in Kenmore typically costs $180 – $340 for one spring, and about twice that for a matched pair. Springs are the most dangerous part of a garage door – a wound torsion spring stores enough force to cause serious injury if it’s handled without the right tools and training. That’s why we treat spring work as its own specialty rather than a side job. Our technicians have up to 14 years of experience, and spring replacement is a core service for us, not something we hand off.
Most homeowners don’t know whether they have torsion or extension springs until someone looks. Torsion springs sit on a shaft above the door; extension springs run along the sides. The type, the door weight and whether it’s a single or double door all shape the estimate. If you hear a loud bang from the garage and the door won’t lift, stop operating it and call. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out to assess it.
Repair or Replace? How to Decide
The decision usually comes down to age, damage and how many systems are failing at once. A single broken spring on an otherwise sound door is an easy repair. A 20-year-old door with a bent track, failing panels and an opener on its last legs is a different conversation, and the repair total can approach the low end of a new installation.
Here’s a rough way to think about it:
- Repair when the door structure is sound and you’re fixing one or two components. Springs, cables, rollers, tracks and openers are all serviceable, and a repair keeps a good door in service.
- Replace when panels are dented or rusted through, the track is bent beyond realignment, or you’re stacking several repairs on the same door. At that point the new-door range starts to make more sense than chasing problems.
We’re happy to walk through both options and give you the numbers side by side. Call (855) 981-4153 for a free estimate.
Same-Day Repair and What Happens When You Call
A broken garage door that traps a car or leaves a home open is an emergency, and we treat it that way. Emergency garage door service is a standard part of what we offer, not a rare exception. When you call, we ask a few questions about the door, the opener and what it’s doing, then schedule a technician. Fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and the phone line is answered 24/7.
On arrival, the technician inspects the door, the springs, the cables, the tracks and the opener, then explains what’s wrong and what it will cost. You get the price in writing before any work begins. If it’s a repair we can complete on the spot, we do. If it’s a replacement, we’ll quote the new door and schedule the install. Either way, the goal is the same – back in service today.
Why Brand Familiarity Matters for Your Estimate
Garage door and opener brands aren’t interchangeable, and a technician who knows your equipment gives a more accurate estimate the first time. We’re factory-familiar with eight of the most widely installed brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. That means we can service virtually any system a Kenmore homeowner already has, whether it’s a LiftMaster opener that won’t respond to the remote or a Clopay door that needs a panel matched.
It also means fewer surprises. When a technician already knows how a particular opener’s logic board or a particular door’s hardware is put together, the diagnosis is faster and the estimate is tighter. If your brand isn’t on the list, call anyway – we’ll tell you straight whether we can handle it.
FAQs – Garage Door Cost
How much does garage door repair cost in Kenmore?
Garage door repair in Kenmore typically runs $150 – $600, depending on what failed. A roller swap or track realignment sits near the bottom; a spring plus cable plus panel job climbs toward the top. Call (855) 981-4153 for an exact quote – estimates are free.
How much does a new garage door cost in Kenmore?
New door installation in Kenmore typically costs $700 – $2,200. A basic single-car steel door lands near $700, and a larger insulated door climbs toward $2,200. The written estimate sets the final price. Call (855) 981-4153 for a free quote.
Is it cheaper to repair or replace my garage door?
Repair is almost always cheaper when the door structure is sound – a spring or opener fix stays well below the $700 floor for a new door. Once you’re stacking multiple repairs on an aging door, replacement can be the better value. Call (855) 981-4153 and we’ll price both options for you.
How much does spring repair cost?
Spring repair in Kenmore typically costs $180 – $340 for one spring. A matched pair is usually replaced together and costs about twice that. Springs are dangerous to handle without the right tools, so leave this one to a trained technician. Call (855) 981-4153 for a free estimate.
Can you come today?
Same-day service is often possible. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (855) 981-4153 and we’ll get you scheduled as soon as we can.
Get Your Free Estimate
Whether your door needs a quick repair or you’re weighing a full replacement, the first step is a written estimate – and ours costs nothing. Garage doors are all we do, from emergency spring failures to new installations, and we service the major brands homeowners already have. Call (855) 981-4153. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Kenmore market as of 2026. Kirkland Garage Door Repair Pros offers free estimates – call (855) 981-4153.
Written by the team at Kirkland Garage Door Repair Pros.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Tracy Parker"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Travis Norris"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Katie Miller